StudioDeck
Entry-level belt-drive turntable with a 10-inch aluminum gimbaled tonearm, isolated 300 RPM AC synchronous motor and 3/4-inch Delrin platter. Aimed at home listeners who want an adjustable, upgradeable vinyl setup, available with or without a cartridge.
- Belt drive, 33 1/3 and 45 RPM
- 10-inch straight aluminum gimbaled tonearm
- Isolated 300 RPM AC synchronous motor
- 3/4-inch Delrin platter, inverted bearing
- Anti-vibration feet developed with HRS
- Designed and manufactured in the USA
Fotografii
8Anunțuri
Încă nu sunt anunțuri pentru acest model
Când cineva vinde un StudioDeck, anunțurile și istoricul vânzărilor vor apărea aici.
Vinde unul la felDescriere
The StudioDeck is a two-speed (33 1/3 and 45 RPM) belt-drive turntable designed and manufactured in the USA. A stepped Delrin pulley on a 300 RPM AC synchronous motor selects the speed, and the motor is decoupled from the rest of the deck with damping materials so its vibration stays away from the platter and stylus.
The plinth combines an aluminum plate bonded to an MDF body (constrained-layer damping) and sits on anti-vibration feet developed with Harmonic Resolution Systems. The platter is 3/4-inch Delrin and turns on a steel, bronze and Teflon inverted bearing. The 10-inch straight aluminum tonearm uses a gimbaled bearing and provides adjustment for tracking force, VTA, azimuth and anti-skate.
It is offered in several versions: a Foundation model without dust cover but with the StudioTracker cartridge, a model with no cartridge, and StudioDeck+, +U and +M versions supplied with the StudioTracker, UltraTracker and MasterTracker cartridges respectively. A manual and a repacking guide are available for download.
Video
Specificații
- Marcă
- MoFi Electronics
- Model
- StudioDeck
- Categorie
- Hi-Fi și audio pentru casă › Pickupuri
Audio
- Drive type
- Belt drive
- Speeds
- 33 1/3 RPM, 45.0 RPM
- Wow & flutter
- 0.017% – 0.025%
- Signal-to-noise ratio
- 72dB
Motor and platter
- Motor
- 300 RPM AC Synchronous
- Platter
- 3.88 lb Delrin®
- Platter thickness
- 3/4-inch
- Bearing
- Steel and Teflon inverted bearing
Tonearm
- Type
- 10" straight aluminum, gimbaled bearing
- Overhang
- 0.71" (18mm)
- Offset angle
- 22.8˚ (+/- 2˚ adjustable)
- Cartridge weight range
- 5g – 10g
- Adjustments
- Tracking force, VTA, azimuth, anti-skate
Power
- Power supply requirements
- 120V 60Hz, 220-230V 50Hz, 100V 50Hz
Physical
- Dimensions
- 19.69" x 5.375" x 14.25"
- Weight
- 19.1 lb
- Plinth
- Aluminum plate bonded to MDF body
- Feet
- Anti-vibration feet by HRS
Versions
- StudioDeck Foundation
- No dust cover, with StudioTracker
- StudioDeck
- No cartridge
- StudioDeck+
- With StudioTracker
- StudioDeck+U
- With UltraTracker
- StudioDeck+M
- With MasterTracker
Downloads
- Documents
- StudioDeck Manual, StudioDeck Repacking Guide