MB2i
Large three-way stand-mounted reference monitor from PMC's i series, using ATL bass loading and a 310mm Radial bass driver. It reaches down to 20Hz and suits listeners and studios wanting full-range, high-resolution monitoring.
- Three-way passive monitor with ATL bass loading
- 310mm Radial bass driver, 75mm mid, 27mm tweeter
- Frequency response 20Hz-25kHz
- Tri-wire or tri-amp via 3 pairs of 4mm sockets
- Recommended amplifier power 250-900W, 4 ohms
- 20-year warranty when registered within 10 days
Fotografii
5Anunțuri
Încă nu sunt anunțuri pentru acest model
Când cineva vinde un MB2i, anunțurile și istoricul vânzărilor vor apărea aici.
Vinde unul la felDescriere
The MB2i is a three-way passive loudspeaker built around PMC's Advanced Transmission Line (ATL) bass loading, with an effective line length of 3m. It pairs a 310mm Radial bass driver, a 75mm soft-dome midrange and a 27mm Sonolex soft-dome tweeter, and its stated response runs from 20Hz to 25kHz.
The Radial bass unit has an exposed finned structure intended to keep the cone rigid and the voice coil cool during large excursions. The veneered cabinet uses precision-cut panels up to over 35mm thick, with internal damping and bracing that form the transmission line. A hand-built 24dB per octave crossover with individually matched components divides the bands at 380Hz and 3.8kHz.
Connection is by three pairs of 4mm sockets, allowing tri-wire or tri-amp operation, with a recommended amplifier power of 250-900W into 4 ohms. A matching horizontal centre model (MB2i-C) and XB2 subwoofer are available for surround setups, and pre-tuned stands are offered for the large stand-mounted i series models.
Video
Specificații
- Marcă
- PMC
- Model
- MB2i
- Categorie
- Studio › Monitoare de studio
Audio
- Frequency response
- 20Hz-25kHz
- Sensitivity
- 91dB 1w 1m
- Impedance
- 4 Ohms
- Crossover frequency
- 380Hz & 3.8kHz
- Effective ATL length
- 3m / 10ft
- Design
- Three-way, ATL bass loading
Drive units
- LF
- 310mm Radial driver
- MF
- PMC 75mm soft dome
- HF
- 27mm Sonolex soft dome, ferro-fluid cooled
Inputs
- Input connectors
- 3 pairs 4mm sockets (tri-wire or tri-amp)
Power
- Recommended amplifier power
- 250-900W
Physical
- Height
- 870mm (34.25")
- Width
- 380mm (14.96")
- Depth
- 535mm (21.06")
- Weight
- 49kg (47.108lbs)
Warranty
- Extended warranty
- 20 years if registered within 10 days of purchase