
DynaCaster
Front-addressed cardioid dynamic microphone with a built-in pop filter, shockmount and stand mount, plus a switchable +30 dB active preamp. Aimed at podcasters, streamers, broadcasters and vocal or instrument recording.
- Front-addressed cardioid dynamic with aluminum voice coil
- Switchable preamp adds 30 dB gain (needs 48 V phantom)
- Two recessed EQ switches give six configurations
- Built-in 3-layer pop filter and shockmount
- All-metal body with gold-plated 3-pin XLR
- Frequency range 20 Hz - 19 kHz
Fotografii
7Anunțuri
Încă nu sunt anunțuri pentru acest model
Când cineva vinde un DynaCaster, anunțurile și istoricul vânzărilor vor apărea aici.
Vinde unul la felDescriere
The DynaCaster DCM8 is an all-metal dynamic microphone with an aluminum voice coil and neodymium magnet, using capsule technology derived from the maker's V Series dynamics. It has a cardioid pattern and is addressed from the front, which helps reject room noise around a close source.
A switchable preamp adds 30 dB of gain when engaged and 48 V phantom power is supplied. With the switch off, the microphone works passively and needs no external power. Two recessed switches give up to six EQ configurations, covering low-end and high-end shaping, such as trimming boominess or sibilance, and the recessed placement protects settings from accidental changes.
A three-layer pop filter and a shockmount are built into the body, so no external accessories are needed. The integrated stand mount swivels widely and fits a range of boom arms. Connection is by a gold-plated 3-pin male XLR. The package includes an external windscreen, a thread adapter, a sticker and a manual with warranty card.
Video
Specificații
- Marcă
- sE Electronics
- Model
- DynaCaster
- Categorie
- Studio › Microfoane
Audio
- Capsule
- Dynamic
- Voice coil
- Aluminum
- Magnet
- Neodymium
- Directional pattern
- Cardioid
- Frequency range
- 20 Hz - 19 kHz
- Sensitivity
- 2.0 / 60 mV/Pa (-54 / -24 dBV)
- Preamp gain (switchable)
- +30 dB
- EQ configurations
- Up to 6 (two recessed switches)
Power
- Powering
- 48V Phantom Power (P48 according to IEC 61938)
- Current
- 3.0 mA
- Electrical impedance
- 300 / 135 Ohms
- Recommended load impedance
- > 1k Ohms
Connectivity
- Connector
- 3-pin male XLR (gold-plated)
Physical
- Diameter x length
- Ø 62 x 220 mm (ø 2.44 x 8.66 in.)
- Weight
- 850 g (29.98 oz.)
- Housing
- All-metal, matte black finish
- Pop filter
- Integrated 3-layer
- Shockmount
- Integrated
In the box
- Microphone
- DynaCaster
- Windscreen
- External windscreen
- Adapter
- Thread adapter
- Extras
- sE logo sticker
- Documentation
- User manual with warranty card