Octave Multiplexer
Analog sub-octave pedal that adds a bass tone one octave below the note played, with a blend control and two filters for shaping the sub signal. It is monophonic, so it suits bass and single-note guitar lines and can also be used on vocals.
- Analog sub-octave one octave below the played note
- Separate High Filter and Bass Filter controls
- Sub switch and Blend (wet/dry) knob
- Monophonic: works on single notes only
- True bypass with Dry Out and Effect Out jacks
- 9V battery included; die-cast chassis
Fotografii
8Anunțuri
Încă nu sunt anunțuri pentru acest model
Când cineva vinde un Octave Multiplexer, anunțurile și istoricul vânzărilor vor apărea aici.
Vinde unul la felDescriere
The Octave Multiplexer is an analog sub-octave generator in a die-cast chassis. It produces a tone one octave under the played note and mixes it with the dry signal using a wet/dry Blend knob. It tracks single notes only, so chords will not work as intended.
The sub-octave can be shaped with two separate filters. The Bass Filter adjusts the fundamental and lower harmonics of the sub-octave, and a Sub switch brings that filter in or out. The High Filter adjusts the higher harmonics. A footswitch with a status LED engages the effect, and the pedal uses true bypass.
The instrument plugs into the input jack. The Effect Out jack goes to the amplifier, and a separate Dry Out jack is wired directly to the input for running a parallel path. Power comes from a 9V battery, which is included, or from an optional 9.6VDC 200mA adapter sold separately. The pedal was released in 2007 and discontinued in 2021.
Video
Specificații
- Marcă
- Electro-Harmonix
- Model
- Octave Multiplexer
- Categorie
- Efecte și pedale
Audio
- Circuit
- Analog
- Audio
- Mono
- Bypass
- True Bypass
- Effect type
- Analog sub-octave generator
Controls
- High Filter knob
- Shapes the higher harmonics of the sub-octave
- Bass Filter knob
- Shapes the fundamental and lower harmonics of the sub-octave
- Blend knob
- Wet/dry
- Sub switch
- Switches the Bass Filter in and out
- Footswitch
- Engages/disengages the effect, with status LED
Inputs
- Input jack
- 1, for instrument
Outputs
- Effect Out jack
- Connects to amplifier
- Dry Out jack
- Connected directly to the Input jack
Power
- Power supply
- 9V battery included
- Optional adapter
- 9.6VDC-200mA (not included)
- Current draw
- 12mA
Physical
- Dimensions (in)
- 4.75 x 4 x 2.25
- Chassis
- Die-cast
In the box
- Battery
- 9V battery