Green4
The Green4 is a moving iron phono cartridge from Grado's Prestige Series, fitted with an elliptical diamond stylus on an aluminum cantilever. It suits vinyl listeners who want a user-serviceable cartridge in either standard half-inch or P-mount form.
- Moving iron design with 4 mV output
- Elliptical diamond on aluminum cantilever
- User-replaceable stylus, interchangeable in Prestige Series
- Frequency response 10-55,000 Hz
- Tracking force 1.6-1.9 g, weight 6 g
- Standard half-inch or P-mount versions
Fotografii
8Anunțuri
Încă nu sunt anunțuri pentru acest model
Când cineva vinde un Green4, anunțurile și istoricul vânzărilor vor apărea aici.
Vinde unul la felDescriere
Green4 is an entry model in the Prestige Series and uses Grado's moving iron design, in which the coils stay fixed while a very light moving assembly carries the stylus. It has a high output of 4 mV, so it can work with a wide range of phono stages. The housing is die-injection molded.
The stylus is a bonded elliptical diamond on an aluminum cantilever. The stylus assembly can be replaced by the user, and styli are interchangeable across the Prestige Series. Internal wiring uses 5N OCC copper, and each cartridge receives cryogenic treatment and internal damping to reduce resonance.
It is offered in two mounting versions: a standard half-inch screw mount and a P-mount for turntables with a P-mount headshell or tonearm. It weighs 6 grams and tracks at 1.6 to 1.9 grams.
Specificații
- Marcă
- Grado
- Model
- Green4
- Categorie
- Echipamente DJ › Doze și ace
Electrical
- Output
- 4 mV @ 5 CMV (45 degrees)
- Frequency response
- 10-55,000 Hz
- Channel separation
- Average 25 dB, 10-30,000 Hz
- Input load
- 10k - 47k ohms
- Inductance
- 50 mH
- DC resistance
- 660 ohms
Stylus
- Stylus
- Diamond - Elliptical
- Cantilever
- Aluminum
- Stylus replacement
- User-replaceable
- Compliance
- 20 um/mN
- Tracking force
- 1.6 - 1.9 grams
Design
- Generator type
- Moving iron (flux-bridger principle)
- Internal wiring
- 5N OCC copper
- Treatment
- Cryogenic treatment and internal damping
- Housing
- Die-injection molded
Physical
- Cartridge weight
- 6 grams
- Mounting
- P-mount or 1/2'' Screw Mount
- Series
- Prestige Series