M3-6
The M3-6 is an active three-way studio monitor with a 6" woofer, 5" midrange and 1" silk dome tweeter, each driven by its own internal amplifier. It suits project and home studios that want three-way monitoring in a cabinet the size of a typical two-way.
- Three-way active design: 6" woofer, 5" midrange, 1" silk dome tweeter
- Tri-amped Class A/B, 160 W total
- Frequency response 40 Hz - 22 kHz
- 3-band EQ with bypass; low-cut switch (flat/80/100 Hz)
- XLR and 1/4" balanced inputs plus RCA unbalanced
- In-line midrange and tweeter with integrated waveguide
Fotografii
8Anunțuri
Încă nu sunt anunțuri pentru acest model
Când cineva vinde un M3-6, anunțurile și istoricul vânzărilor vor apărea aici.
Vinde unul la felDescriere
The M3-6 splits the signal across three drivers: a 6" woven Kevlar woofer, a 5" woven Kevlar midrange and a 1" silk dome tweeter in an integrated waveguide. The tweeter sits at the apex of the midrange so both radiate from the same point. Crossover points are 400 Hz (low-mid) and 4 kHz (mid-high).
Three internal Class A/B amplifiers, 160 W in total, power the drivers separately (110 W low, 30 W mid, 20 W high). A three-band EQ (LF, MF and HF, each ±6 dB) with a bypass switch lets the response be adjusted to the room, and a switchable low-cut filter (flat, 80 Hz or 100 Hz) helps when a subwoofer is used. Protection covers current limiting, over-temperature, switch-on/off transients and subsonic content. Blue pinhole LEDs assist with placement.
Signals connect through balanced XLR or 1/4" inputs, or an unbalanced RCA input. Volume and power controls are on the rear panel. The cabinet is vinyl-laminated with a wood veneer front baffle and chamfered top edges, and the internal bracing is optimised to limit vibration.
Video
Specificații
- Marcă
- M-Audio
- Model
- M3-6
- Categorie
- Studio › Monitoare de studio
Drivers
- Low-frequency driver
- 6" woven Kevlar
- Mid-frequency driver
- 5" woven Kevlar
- High-frequency driver
- 1" silk dome tweeter with integrated waveguide
Audio
- Frequency response
- 40 Hz - 22 kHz
- Crossover frequency, Low-Mid
- 400 Hz
- Crossover frequency, Mid-High
- 4 kHz
- Input sensitivity
- 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
- Polarity
- Positive signal at + input produces outward LF cone displacement
Amplification
- Amplifier type
- Tri-amp Class A/B
- Total power
- 160 W
- Low-frequency amplifier power
- 110 W
- Mid-frequency amplifier power
- 30 W
- High-frequency amplifier power
- 20 W
Controls
- LF EQ
- ± 6 dB boost/cut at 100 Hz
- MF EQ
- ± 6 dB boost/cut at 1 kHz
- HF EQ
- ± 6 dB boost/cut at 10 kHz
- EQ bypass
- Bypass switch
- LF cutoff switch
- flat, 80 Hz, 100 Hz
Inputs
- Input connectors
- XLR and 1/4" balanced; RCA unbalanced
- Input impedance
- 20 kΩ balanced, 10 kΩ unbalanced
Protection
- Protection
- Output current limiting; over-temperature; transient on/off protection; subsonic filter; external mains fuse
Physical
- Cabinet
- Wood veneer front baffle with vinyl-laminated cabinet
- Size (W x H x D)
- 9.25" x 15" x 9.06"; 235 mm x 381 mm x 230 mm
- Weight
- 23.15 lbs.; 10.5 kg