Studio Classic Combo
Single-channel 20W all-valve combo amplifier from Marshall's Studio range, built in the UK and voiced after the JCM800. A switch drops output to 5W for home and rehearsal use, and it carries a 10-inch Celestion speaker.
- 20W all-valve combo, switchable to 5W
- 2 x EL34 power valves, 3 x ECC83 preamp valves
- 1x10" Celestion VT-Junior speaker, 16Ω
- Single channel with master volume
- Series switchable effects loop and DI output
- Made in UK; weighs 14.55 kg
Fotografii
8Anunțuri
Încă nu sunt anunțuri pentru acest model
Când cineva vinde un Studio Classic Combo, anunțurile și istoricul vânzărilor vor apărea aici.
Vinde unul la felDescriere
The Studio Classic Combo is a compact, single-channel valve combo modelled on the JCM800 sound. It uses two EL34 power valves and ECC83 preamp and phase-splitter valves, with a master volume so the amp can be pushed into overdrive at lower levels. A switch changes output between 20W and 5W.
Controls are preamp volume, master volume, treble, middle, bass and presence. There are two 1/4" instrument inputs with high and low sensitivity, and a series effects loop that can be switched in and out. The amp has no built-in effects. Sound is produced by a 1x10" Celestion VT-Junior speaker rated at 16Ω and 50W.
For connections, the rear panel has five 1/4" speaker output jacks covering 16Ω, 8Ω and 4Ω loads, plus a 1/4" DI output. The amp is built at the maker's factory in Bletchley, England, with some hand-soldered construction, and comes in a black finish with a detachable power cable.
Video
Specificații
- Marcă
- Marshall
- Model
- Studio Classic Combo
- Categorie
- Sonorizare live › Amplificatoare
General
- Model
- SC20C
- Range
- Studio
- Colour
- Black
- Country of origin
- Designed and engineered in UK. Made in UK.
Audio
- Output wattage
- 20W (with power reduction option to 5W)
- Channels
- Single channel
- Controls
- Preamp volume, master volume, treble, middle, bass, presence
- Built-in effects
- None
- Effects loop
- Yes, 1 x series switchable
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Speaker
- Speaker configuration
- 1x10"
- Speaker model
- Celestion VT-Junior (16Ω, 50W)
- Unit impedance
- 16Ω
Inputs
- Instrument inputs
- 2 x 1/4" jack (high/low sensitivity)
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- DI output
- 1/4" jack
Physical
- Weight
- 14.55 kg / 32 lb
- Width
- 510mm / 20.1"
- Height
- 460mm / 18.1"
- Depth
- 255mm / 10"
In the box
- Box contents
- Detachable power cable included